Sakai SV400D-2, Руководство по ремонту

Страница: 15 / 218

1-003
GENERAL SAFETY
1-5. Pre Start Inspection
Inspect your machine daily. Ensure that the routine maintenance and lubrication are properly
performed. Repair or replace any malfunctioning, broken or missing parts before using the
machine. Refer to the maintenance schedule in the Operator’s Manual.
Check that all instructions and safety stickers are in place and readable.
Never fill the fuel tank with the engine running or while near an open flame or while smoking.
Always clean up any spilled fuel.
Check for any warning tags placed on the machine, do not operate the machine until all repairs
have been made and warning tags have been removed by authorized personnel.
Check the seat belt for wear or damage; inspect the belt hardware and fabric. Replace if
hardware is damaged or the belt is frayed or nicked or stitching is loose. Check that mounting
hardware is tight.
Clean the steps and operating platform of dirt and foreign matter to reduce danger of slipping.
Know how to shut-down or stop the machine immediately in case of emergency.
Know the capabilities and limitations of the machine such as speed, gradeability, steering and
braking.
Be aware of the dimensions of the machine such as height, weight especially for transporting.
1-6. Safety Instructions
Take all necessary precautions to ensure that the machine is used only when in a safe and
reliable condition.
Avoid any operational mode that might compromise safety.
Operate the machine only if all protective and safety devices are in place and fully functional.
Always use the hand rails and steps to get on and off your machine maintaining 3-point contact
(using both hands).
1-7. Starting
Start the machine only from the driver’s seat and always wear the seat belt.
Watch that the warning lights and indicators during start-up and shutdown are working in
accordance with operating instructions.
Watch that no one is in danger before starting and when moving the machine.
Check that braking, steering, signals and lights are fully functional before starting work or
traveling with the machine.
1-8. Operating
Always make sure that there are no obstructions or persons in your line of travel before starting
the compactor in motion.
Never climb on and off the machine while it is in motion.
Always remain seated with the seat belt fastened when traveling, compacting or loading or
unloading the machine.
Use caution and be very observant when operating in close quarters and congested areas.
Obey all traffic regulations when working on public roads and make sure machine is compatible
with these regulations.
Never carry passengers.
Know and use the hand signals for particular jobs and who has the responsibility for signaling.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•