Sakai SV400D-2, Руководство по ремонту

Страница: 107 / 218

6-005
VIBRATORY DRUM
8) Place chock blocks at the front and rear
of the removed drum assembly (11) to
prevent the drum assembly from moving.
2-1-2. Installation of vibratory drum
1) Install the vibratory drum in the reverse
order in which it was removed.
Tightening torque for bolts in locations requiring
particular attention during reinstallation of the
vibratory drum:
(10) M20×90: 540 N·m (398 lbf·ft)
(2) M20×100: 540 N·m (398 lbf·ft)
2) When installing the vibratory drum, pay
particular attention to the items mentioned
below.
If the engine is run at high speed or the
cylinder is operated to full stroke when the
engine is started for the first time after work
is completed, the piston packing or other
items may be damaged by air entering into the
cylinder.
Fill the hydraulic oil tank to the specified level
to make up for any oil leakage.
Start the engine and circulate the oil through
the piping. Then check the oil level again,
ensuring that the oil is at the specified level.
•
SV400-2-06009
Chock block Chock block
11
SV400-2-06009
Chock block Chock block
11