Sakai SV400D-2, Руководство по ремонту

Страница: 113 / 218

6-009
VIBRATORY DRUM
6) Attach the lifting bolts (M16×2.0) as shown in
the figure on the right.
Using a crane, slowly lift and remove the axle
shaft (32).
At this time, to ensure that the vibrator
shaft does not follow along with the axle
shaft (32), lift the end of the vibrator shaft
while lightly tapping with a wooden
hammer through a wood block.
Axle shaft: 140 kg (309 lbs.)
When attaching the lifting bolts, screw in the
threads fully before using.
7) Attach a lifting bolt (M10×1.5) to the end of the
vibrator shaft (4). Then lift with a crane and
remove.
Vibrator Shaft: 140 kg (309 lbs.)
8)
In the figure on the right, the vibrator motor side
is up. From the top, the figure shows the
condition with the part removed.
•
SV400-2-06017
Lift with crane
Wooden block Wooden hammer 32
SV400-2-06017
Lift with crane
Wooden block Wooden hammer 32
SV400-2-06018
Lift with crane
4
SV400-2-06018
Lift with crane
4
SV400-2-06019 SV400-2-06019