Sakai SV400D-2, Руководство по ремонту

Страница: 120 / 218

6-016
VIBRATORY DRUM
8) Install the oil seal (28) to the cover (22).
Lightly apply grease to the lip surfaces of the oil
seal (28).
Using the six bolts (29) and spring washers,
firmly secure the cover (22) to the housing.
(29) M12×40: 108 N·m (80 lbf·ft)
9)
Lightly apply gear oil to the press-fitting surface
of the vibrator bearing (3).
Drive the vibrator bearing (3) into the axle shaft
(36).
Axle shaft : 97 kg (214 lbs.)
Vibrator bearing : 7 kg (15 lbs.)
10) Install the O-ring (35) to the axle shaft (36).
Lightly apply grease to the entire circumference
of the O-ring (35).
Using the sixteen bolts (34) and washers, firmly
secure the axle shaft (36) to the drum.
(34) M16×50: 270 N·m (199 lbf·ft)
NOTE : When installing, make sure that the
O-ring does not protrude from the
groove.
Use aids such as work stepladders when
working, and work with a natural, unstrained
posture.
•
•
•
•
•
SV400-2-06037
22
29
28
SV400-2-06037
22
29
28
SV400-2-06038
36
3
SV400-2-06038
36
3
SV400-2-06039
34
36 35
SV400-2-06039
34
36 35