Sakai SV400D-2, Руководство по ремонту

Страница: 45 / 218

3-007
PUMP MOUNT
3-2. Pump Attachment
After removing the pump assembly from the
engine for repair or replacement, reattach
it in accordance according to the following
procedure:
Apply an ample amount of molybdenum
grease to the spline surface of the hub (3)
and pump (1).
Attach the hub (3) to the pump (1).
Pressing the spline end of the pump (1)
against the internal snap ring (4), firmly
secure the hub (3) with the bolt (9).
(9) M12 × 35: 86 N·m (63.4 lbf·ft)
Confirm that the distance between the
end of the pump (1) and the snap ring (4)
is the specified value.
Specified dimensions: 9 mm (4.33 in)
Attach the housing (7) to the pump (1),
and firmly secure with the four bolts (11),
spring washers and washers.
(11) M14×45: 167 N·m (123.2 lbf·ft)
Attach the flange (2) to the engine fly
wheel, and firmly secure with the eight
bolts (8).
(8) M10×35: 49 N·m (36.1 lbf·ft)
Ensuring engagement of the flange (2)
and hub (3), attach the pump assembly to
the flywheel.
Tighten and firmly secure the pump
assembly with the ten bolts (10), washers,
two bolts (12) and spring washers.
(10) M10×25: 59 N·m (43.5 lbf·ft)
(12) M10×30: 59 N·m (43.5 lbf·ft)
If you replace bolts (8), which have fixation
glove applied to them, replace them with new
bolts.
•
SV400-2-03007
B
B
8
3
4
2
A
A
SECTION A-A
7
10
11
12
12
1
SV400-2-03007
B
B
8
3
4
2
A
A
SECTION A-A
7
10
11
12
12
1