SAGEMCOM MF5990, Руководство пользователя

Страница: 26 / 146

- 26 -
MF 5990 - Agoris M943
4 - Configuring the machine and the services
Adjusting Scanner / Printer margins
If you notice an offset between the printer and the
scanner, correct the margins (expressed in pixels)
according to the reference paper specified in
SETTINGS
> SCANNER/PRINTER > PAPER FORMAT .
To correct and adjust the scanner / printer margins:
1 Press MENU .
2 Select SETTINGS > SCANNER/PRINTER >
ADJUSTMENTS .
3 Make the necessary adjustment(s).
4 Press MENU to return to the home screen.
PC printing parameters
To personalize PC printing parameters:
1 Press the MENU key.
2 Select SETTINGS > SCANNER/PRINTER > PC
PRINT .
3 Make the necessary adjustment(s).
Setting Description / Procedure
Printer top margin Press TOP PRINTER .
Enter an offset value of between
-100 and +100.
Press
OK to confirm.
Printer left margin Press LEFT PRINTER .
Enter an offset value of between
-100 and +100.
Press
OK to confirm.
Flatbed scanner
top margin Press TOP FB SCANNER .
Enter an offset value of between
-100 and +100.
Press
OK to confirm.
Flatbed scanner
left margin Press LEFT FLATBED
SCANNER .
Enter an offset value of between
-100 and +100.
Press
OK to confirm.
Autofeed scanner
top margin Press HIGH TOP SCANNER .
Enter an offset value of between
-100 and +100.
Press
OK to confirm.
Autofeed scanner
left margin Press LEFT ADF SCANNER .
Enter an offset value of between
-100 and +100.
Press
OK to confirm.
Parameters Description / Procedure
TONER SAVE Lightens printing to save toner
cartridge ink.
TASK DELAY Waiting time for data from the
PC before the PC print task is
cancelled.
FONTS This parameter is used to draw
up the set of symbols. The
possible values are between
CS1 and CS30 included. The
default value is CS1 (Roman8).
FONT NUMBER Start printing the list of fonts.
This parameter can be used to
set the default PCL font. The
possible values are between 1
and 77 included. The default
value is 1.
LINES PER PAGE This parameter is used to set the
number of lines per page.
This variable is linked to the PJL
variables: PAPER and
ORIENTATION. If you change
one of these variables, the Line
format variable is automatically
updated (only for the current
print task) in order to respect the
same spacing.
The possible values are
between 5 and 128 included.
The default value is 60.
FONT SPACING This parameter is used to set the
default font spacing in
characters per inch (the default
font must be non-proportional).
The possible values are
between 0.44 and 99.99
included. The default value is
10.00.
FONT SIZE This parameter is used to set the
default font height, in points (the
default font must be
proportional). The possible
values are between 4.00 and
999.75 (in intervals of 0.25). The
default value is 12.00.
ORIENTATION This parameter is used to set the
page orientation: portrait or
landscape. The default value is
"portrait".
DUPLEX This parameter is used to print
duplex. By default, printing is
done in
duplex .
BINDING EDGE This parameter is used to print
duplex on the
long edge or the
short edge . The default value is
"long".
Parameters Description / Procedure