MF 5990 - Agoris M943
- 13 -
2 - Installation
1
Connect one end of the telephone cable to the ma-
chine socket and the other to the wall telephone
socket.
4
Connect one end of the LAN network cable (not
supplied) to the machine port and the other to your
local network port for the machine.
5
Ensure that the On/Off button is on Off (position 0).
6
Connect the mains cable to the machine. Connect
the mains cable to the wall socket.
7
Press the On/Off button to switch the machine on
(position I).
Initial configuration of the machine
After a few seconds, when the printer preheating phase is
complete, the machine initialisation phase starts.
1
Insert the initialization card provided with the ma-
chine in the card reader.
2
Once the analysis is complete, remove the initiali-
zation card from the card reader.
Note
If you have the dual-line model, and you
want to connect the machine to two dedica-
ted telephone lines:
a) Connect the end of the telephone
line cable
1
to the
L1
machine
socket.
b) Connect the end of the telephone
line cable
2
to the
L2
machine
socket.
c) Connect the other ends of the line
1
and
2
cables to the corresponding
telephone wall sockets.
WARNING
The power cable is used to disconnect the
machine from the power supply. As a pre-
caution, the mains power socket must be lo-
cated near the machine and easily
accessible in the event of danger.
Содержание MF5990
Страница 1: ...TELECOM User Manual MF5990 Agoris M943...