SAGEMCOM MF5990, Руководство пользователя

Страница: 11 / 146

MF 5990 - Agoris M943
- 11 -
2 - Installation
5 Press on the longitudinal paper guide and slide it to
the required paper format.
6 Press on the right lateral paper guide and slide it to
the required paper format.
7 Fan the paper and even it up on a flat surface to
prevent paper jams or skewed prints.
8 Load the sheets into the paper tray with the print
surface facing up.
9 Make sure the paper does not exceed the fill limit.
10 Replace the cover on the paper tray. Ensure that
the cover is properly closed.
11 Replace the paper tray in the machine and push it
in fully.
12 Define the paper format and type used in the ma-
chine.

The machine automatically detects standard paper
formats. To check / define the format and type of pa-
per loaded, consult the section Paper settings [
 25].
Loading transparencies into the paper tray
1 Remove the paper tray from the machine and place
it on a flat surface.
Note
The loading capacities depend on the paper
tray used:
- main / additional paper tray: up to 550
sheets of standard paper (80g/m² [22lb])
- secondary paper tray: up to 150 sheets
of standard paper (80g/m² [22lb])
Caution
Only use transparencies for black and white
printing.
Never use transparencies for colour prin-
ting. You may risk damaging the machine.
Remove printed transparencies from the
output tray to prevent the accumulation of
static electricity.