SafanDarley E-Brake Premium 100-3100, Инструкция по эксплуатации, Страница: 98 / 133

SafanDarley E-Brake
Troubleshooting
Instruction manual SafanDarley E-Brake Premium 100-3100 100Pr 2019 98
FAILURE/
PROBLEM CAUSE REMEDY
To taut the drive belts, both shafts of the
gearbox (above the motor) should be turned.
See the sticker near the two motors for the
correct turning direction.
Put the selector safety switch back in position
for production.
Push the reset push button, then push the
main drive on button
Incorrect size
of product Back gauge
position does not
correspond with
back gauge control
value
Re-adjust back gauge fingers (By shifting or by
means of micro adjustment)
X-axis does
not position All kind of causes Analyze the problem. Consult SafanDarley or
agent
IPC/Machine
will not
startup Memory stick in the
IPC Remove the memory and restart
Temposonic R-series position sensors
Power Error Description
ON OFF Normal function
ON OFF
Magnet not detected
Wrong quantity of magnets
ON Flashing
Out of range (Analog)
Out of synchronisation
Flashing OFF Programming mode
-