SafanDarley E-Brake Premium 100-3100, Инструкция по эксплуатации, Страница: 81 / 133

SafanDarley E-Brake
Transport, installation, commissioning
Instruction manual SafanDarley E-Brake Premium 100-3100 100Pr 2019 81
5.3. COMMISSIONING
1.
Make sure the press brake is put in its correct position straight away so as
to avoid having to shift it later.
2.
Drill the foundation holes at the rear of the machine and fit the machine to
the floor.
3.
Make sure tool nesting places of top beam and lower beam are parallel;
4.
Make sure back gauge and tool nesting place are parallel;
5.
Fit the control to the swivel arm of the press brake
6.
Adjust the height of the control to a comfortable position for the operator
7.
Then mount the various accessories (if supplied).
8.
A qualified electrician must connect the mains.
9.
Switch on the main voltage of the press brake.
10.
Start the press brake
11.
Check the proper working.
12.
Make sure the various accessories (if supplied) are working properly.
13.
Make an image back-up and restore system.
5.3.1. COMMISSIONING REPORT
Fill in the full commissioning report.
COMMISSIONING REPORT
SafanDarley B.V. or her agent must complete this form when the machine is
commissioned.
When the machine is transferred to the customer’s care the report must be
signed by both the commissioning agent and the customer.
The original is to be retained in the records of SafanDarley B.V., and the copy is
for the customer.
The customer confirms that the machine is correctly installed and that he
understands the operator’s, safety and maintenance handbooks fully