P a g e 7
This chapter teaches you how to control your Diamond saber using just the saber itself. More
advanced control capabilities are available through the Ultrasabers Launcher software, which
is dealt with in the
Adjusting the volume
You can also adjust the volume using the Ultrasabers Launcher software. See
details.
1. Initiate
Trigger two clashes in less than 1 second while keeping the
switch pressed. The easiest way to do this is by hitting the
blade or the hilt with your hand.
Release the switch. The saber will turn off the lights, pause
for half a second then play the idle hum of the current font.
2. Adjust
You can now adjust the sound volume in real-time
while the Diamond Controller is playing the idle hum.
Point the tip of the saber upwards to increase the
volume and downwards to decrease it.
3. Confirm
Press and release the switch. The light will turn on and
the saber will resume normal operation, with the
volume set at the new level.
Tip
3. DIAMOND CONTROL
