P a g e 45
Restoring factory defaults
If the Diamond Controller is reporting errors and you’re unable to fix them following the
recommendations of the diagnose tool, the last resort is to try to restore the factory defaults.
This procedure will rewrite the entire content of the internal memory, including fonts, gestures
and settings, to the default state.
Please note that restoring factory defaults will not necessary restore the board to the same
state you received it in. Depending on your purchasing options, it is possible that the particular
board that you received was customized to your preferences, so restoring factory defaults will
lose that customization.
The recommended procedure when restoring factory defaults is the following:
1)
Make sure that the batteries are fully charged. Restoring factory defaults can take some
time and if the batteries fail during this process you’ll end up with a corrupted memory.
2)
Save each font from your saber on your computer. See
and loading fonts.
3)
Run the diagnose tool. The “Restore Factory Defaults” option will not be enabled until
you run the diagnose at least once.
4)
Press the “Restore Factory Defaults” button. The process will take several minutes as
the entire memory has to be rewritten, please be patient and do not interrupt the process.
5)
Write the fonts that you saved on your computer back to the board.
