P a g e 22
Font selection
On the first page of the wizard you’ll find a list of all the 16 available slots. The slot that you
select here is the one that you’ll edit and write. If you select a used slot, you’ll edit the font that
is already in the Diamond Controller’s internal memory. If you select an unused one, you’ll start
building a new font from scratch.
With “Load Font” you can restore a font previously saved on your computer as a .pfnt file and
with “Clear Font” you can erase an entire font from the Diamond Controller’s internal memory.
♦
When you select another font from this list, the wizard will update its content from the
board. Whatever changes you made to the previously selected font, if you did not write it
on the board or save it on your computer,
will be lost
!
♦
You can disable fonts by clicking on the “Enabled” checkbox. When a font is disabled it
is still stored in the Diamond Controller’s internal memory, but you can no longer use it.
Disabling fonts is one way to shorten your on-board font selection menu without spending
a lot of time clearing and writing the internal memory.
Tips
