P a g e 16
♦
The board configuration is not applied in real-time, you need to press the “Write” button.
♦
The “Read” button reads the configuration from the board. Normally you don’t need to
use it, reading is done automatically when the board connects to the Launcher.
♦
If you assign an accent LED to the battery monitor, you can no longer use that accent
channel for anything else.
♦
The battery monitor is active even if your board is connected to the Launcher, so you can
prevent working with discharged batteries.
♦
You can save the board configuration on your computer, in a
.dcfg
file, using the “Save
to file” button. This file will contain both the main settings and the board configuration.
When you load a .dcfg file, it will instantly program the main settings and the board
configuration.
♦
If you load the default configuration using the “Load Defaults” button, you will change
both the main settings and the board configuration. Just like loading a .dcfg file, the “Load
Defaults” button instantly writes to the board.
Tips
