Rowe RC 4000 + 6000, Руководство по эксплуатации

Страница: 306 / 383

306 ROWE Series 4000 + 6000 Operating instructions
Material
The ROWE network printer series 4000 + 6000 is available in a
variety of configurations, ranging from two rolls in a single
drawer, three rolls in two drawers or, in a maximum
configuration, fours rolls also in two drawers.
Note: Contact your authorized ROWE specialist dealer if you
want further information about the available or upgradable
configurations.
You may load print materials into each roll slot of the ROWE
network printers series 4000 + 6000 that differ in size and type.
Size and type of the material available at the moment are
displayed at the roll menu of the operator panel.
Attention: You will need to inform the system about size, type
and remaining material (paper, transparent material or polyester
film) length after you have inserted the new print material.
You need to state size, type and remaining length of the new
print material so that the following functions will work properly:
- Automatic material change function
Auto zoom and auto format
- Display of remaining length
- Automatic rotation
- and many more
Caution: Wishing to economize your efforts as much as can be,
we recommend you to load heavy rolls (plain paper roll of size
A0 and A1 as well as 175 meter rolls) into the upper tray on
position 1 and 2.
Note: If the roll diameter should exceed 168 mm (>150 m) then you
will need to remove the additional trough metal sheet bolted on with