Rowe RC 4000 + 6000, Руководство по эксплуатации

Страница: 149 / 383

Chapter 5: ROWE Scan Manager 149
[198] Overview buttons of ROWE View function bar
Simple scan process
Initiating a scan process from the ROWE VIEW application, proceed
as follows:
1. Start the browser on a workstation that is connected to the ROWE
system via the network. On the address line, enter the IP address or
the host name of the ROWE network scanner. The following page
will open: [Fig. 199]. Select "ROWE Scan Manger" by clicking on it:
Type of buttons No. Symbols Function
Print button T8.
Open button T9.
Save button T10.
Using this button w ill cause printing
of the current view er section. When
you can see the w hole image on the
view er then the w hole image w ill be
printed. The print set under Scan-to-
Copy w ill be used.
Using this button w ill cause storing
the current view er section. When
you can see the w hole image on the
view er then the w hole image w ill be
stored. A dialog f ield w ill open on
w hich you may select w here and
under w hich name the f ile should be
stored. The f ile f ormat w ill be
automatically adopted f rom the
preset f ormat under Scan-to-File.
Using this button lets you load TIFF
and JPEG f iles into the view er via a
dialog w indow . Then you may apply
all parameters on the f iles.