Rowe RC 4000 + 6000, Руководство по эксплуатации

Страница: 35 / 383

Using the ROWE RS / RCS 4000 + 6000 for printing 35
[10] Overview of ROWE RS / RCS buttons
Type of buttons No. Symbols Function
Scroll m enu button
T9.
Cut button
T8.
You w ill trigger a knife movement
using the Cut button. If you actuate
the cut button during the printing
process then the ongoing print is
"cut" meaning that the printer falls
into the offline mode. Concurrently,
there w ill be a message "Cut at
manual print job delete?" on the
display. Confirm the abortion of the
current print job through actuating the
ENTER button. Please take further
information from chapter " Lack of
resources" from page 42.
You may apply this f unction f or
instance w hen too many or too long
printouts w ere w rongly generated.
Note:
Aborting the printing process
immediately after starting the
medium lets the device
automatically execute the command
only after reaching a minimum
length.
Using the scroll menu button w ill
open an overview menu. It
represents the assignment of all rolls
(max. four) and the remaining length
in percent. The menu closes
automatically after five seconds. The
currently set roll assignment can be
changed if the roll menu button is
pressed once more. See chapter
"Replacing the toner / Inserting
paper" for further information, please