Rowe RC 4000 + 6000, Руководство по эксплуатации

Страница: 228 / 383

228 Series 4000 + 6000 Operating instructions
[308] Description of the ROWE PRINT MASTER "Preset" page
Field Function
Page adaptation
(Continued)
Material
Page size
Rotation
Adapt : The file is matched to the output format, i.e. it will be
enlarged or reduced.
Reduce larger ones: At this scaling type, the
file will always be output 1:1. However, if the file is larger
than the output format then the file will be scaled down to
the output format. Files will never be
output enlarged when this function was selected though.
Note:
The page adaptation has a lower priority than the
scaling factor. This means that the setting of the page
adaptation will be ignored if the scaling factor is not set to
1.0.
Note:
You may only select the scaling mode "Adapt" or
"Reduce larger ones" if you selected a format in the
"Output format" field (not "Auto or Manual") that will not be
scaled in "AUTO" setting and therefore the page adaptation
mode will have no impact.
You may select the material in this field on which the
print file should be output.
In this field you may select a certain format or certain roll size
which to be printed on. Setting "
Manual
" will send the job to
the manual infeed slot of the printer. The default setting in this
field is "
AUTO ", i.e. the output format will exactly correspond
to the input format. Depending on the available roll widths, the
printer will decide on which roll the output will be made.
You may set rotational angles in this field by which the
print files are rotated. You have the choice of the
following settings:
0 No rotation
90-270 Rotation by 90 - 270 degrees
AUTO
The document will be automatically
adapted to the available paper roll by corresponding
rotation. The document will be automatically fed to the
folder in correct position in connection with input of the
title block position.