Rowe RC 4000 + 6000, Руководство по эксплуатации

Страница: 316 / 383

316 ROWE Series 4000 + 6000 Operating instructions
ROWE DISPLAY OF REMAINING LENGTH
The ROWE DISPLAY OF REMAINING LENGTH automatically informs
about the available remaining length of each roll The system will
furthermore recognize when there is no more sufficient material on the
roll for printing the file. Example: You want to print a 10 meter long
drawing but there are only five meters left on the roll. In this case, the
system will warn you automatically indicating 'Lack of resource'. So you
have saved five meters of material which you can use for another print
job.
Note: The ROWE DISPLAY OF REMAINING LENGTH can work only
as precisely as the length of the roll had been previously set. The
counter for remaining length will be automatically reset to the preset
initial value upon inserting the roll. Please check the preset value of
remaining length after any change of roll and adjust it to the inserted roll.
Attention: Not every new 150 meter roll will supply exactly 150 meters.
Heed the allowance of your paper manufacturer, please.
Determining the remaining roll length
1. On the operator panel, press the offline button [Fig. 472] to switch
the printer to offline. The display will then show "Offline".
[472] left offline button on ROWE RS / right offline button on ROWE RCS
2. On the printer operator panel, press the button for the roll menu [Fig.
473]. The display of the operator panel will show an overview of the
inserted rolls. You will change to the configuration menu by pressing
the button of the roll menu once more [see Fig. 473].
[473] Overview of display dialog and buttons to be pressed
R1 841 mm paper 55 %
R2 841 mm paper 92 %
R3 420 mm paper 27 %
R4 297 mm paper 100%