Ross Carbonite Ultra Series, Руководство пользователя

Страница: 47 / 202

• Trans Area — set how the next transition
type and parameters are recalled.
• Next Trans — set how the next transition
area is recalled.
• Run Auto — set whether a transition is
performed after the memory is recalled.
(Not available during Effects Dissolve
transitions.)
• PGM Bus — set how the sources selected
on the program bus are recalled.
• PST Bus — set how the sources selected
on the preset bus are recalled.
• Key X Bus — set whether the source
selected on the key bus is recalled.
• Key X Active — set whether the on-air
status of the key is recalled.
• Key X Type — set whether the key type
is recalled.
• Key X Mask — set whether mask settings
for the key are recalled.
5. Click Canvases .
• Trans Area — set how the next transition
type and parameters are recalled.
• Next Trans — set how the next transition
area is recalled.
• Run Auto — set whether a transition is
performed after the memory is recalled.
(Not available during Effects Dissolve
transitions.)
• PGM Bus — set how the sources selected
on the program bus are recalled.
• PST Bus — set how the sources selected
on the preset bus are recalled.
• Key X Bus — set whether the source
selected on the key bus is recalled.
• Key X Active — set whether the on-air
status of the key is recalled.
• Key X Type — set whether the key type
is recalled.
• Key X Mask — set whether mask settings
for the key are recalled.
6. Click Chroma Key .
• Source — set whether the source selected
on the chroma key bus is recalled.
• Parameters — set whether chroma key
settings are recalled.
7. Click Auxes .
• Aux X — set whether the source selected
on the aux bus is recalled.
8. Click Audio .
Note: If Disable Audio Memories is set to On (Click
Navigation Menu > Configuration > System > Global)
the audio memory attributes are disabled.
• Main — set whether the configuration of
the main audio mix is recalled.
• Monitor — set whether the configuration
of the monitor audio mix is recalled.
• Aux X — set whether the configuration
of the aux audio mix is recalled.
Deleting a Memory
You can delete the contents of a single memory.
Only one memory can be cleared at a time, and
you cannot undo the deletion.
Tip: You can clear all memories from the switcher from the
control panel. (Press MENU > Reset > NEXT > NEXT.)
To Delete a Memory
Delete an individual memory or bank.
1. Click Navigation Menu > Live Assist >
Memory > Store
2. In the Memory Store area, click the Bank X
and Mem X button for the memory register
that you want to delete.
3. Click Delete Memory .
Memory Names and Mnemonics
(TouchDrive only)
Assign custom mnemonic colors and names to
individual memories. These are only visible on
Ultra User Manual (v6.6) — Memory Functions • 47