Ross Carbonite Ultra Series Скачать руководство пользователя

Страница: 4 / 202

Do not defeat the safety purpose of the

polarized or grounding-type plug. A

polarized plug has two blades with one

wider than the other. A grounding type plug

has two blades and a third grounding prong.

The third prong is provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement

of the obsolete outlet.

10.

Protect the power cord from being walked

on or pinched, particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

11.

Only use attachments/accessories specified

by the manufacturer.

12.

Unplug this apparatus during lightning

storms or when unused for long periods of

time.

13.

Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as when the power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or has

been dropped.

14.

Do not expose this apparatus to dripping or

splashing, and ensure that no objects filled

with liquids, such as vases, are placed on

the apparatus.

15.

To completely disconnect this apparatus

from the AC Mains, disconnect the power

supply cord plug from the AC receptacle.

16.

The mains plug of the power supply cord

shall remain readily operable.

17.

Warning:

Indoor Use: To reduce the risk of fire

or electric shock, do not expose this apparatus

to rain or moisture.

18.

The safe operation of this product requires

that a protective earth connection be

provided. A grounding conductor in the

equipment's supply cord provides this

protective earth. To reduce the risk of

electrical shock to the operator and service

personnel, this ground conductor must be

connected to an earthed ground.

19.

Warning:

This apparatus, when equipped with

multiple power supplies, can generate high

leakage currents. To reduce the risk of electric

shock, ensure that each individual supply cord

is connected to its own separate branch circuit

with an earth connection.

20.

CAUTION:

These service instructions are for use

by qualified service personnel only. To reduce

the risk of electric shock, do not perform any

servicing other than that contained in the

operating instructions unless you are qualified

to do so.

21.

Service barriers within this product are

intended to protect the operator and service

personnel from hazardous voltages. For

continued safety, replace all barriers after

servicing.

22.

Certain parts of this equipment still present

a safety hazard with the power switch in the

OFF position. To avoid electrical shock,

disconnect all A/C power cords from the

chassis' rear appliance connectors before

servicing.

23.

This product contains safety critical parts,

which, if incorrectly replaced, may present

a risk of fire or electrical shock. Components

contained within the product's power

supplies and power supply area are not

intended to be customer-serviced and

should be returned to the factory for repair.

24.

To reduce the risk of fire, replacement fuses

must be the same type and rating.

25.

Use only power cords specified for this

product and certified for the country of use.

26.

The safe operation of this equipment

requires that the user heed and adhere to

all installation and servicing instruction

contained within the equipment's Setup

Manuals.

27.

Warning:

This product includes an “ Ethernet

Port ” which allows this product to be connected

to a local area network (LAN). Only connect to

networks that remain inside the building. Do not

connect to networks that go outside the building.

28.

CAUTION:

This apparatus contains a Lithium

battery, which if replaced incorrectly, or with an

incorrect type, may cause an explosion. Replace

only with a CR2032 coin type lithium battery.

Dispose of used batteries according to the

manufacturer's instruction by qualified service

personnel.

29.

CAUTION:

Phantom Power can damage

equipment if not supported. Ensure that

Phantom Power is turned off for the Analog

Input unless you are connecting a microphone

that requires phantom power. Connecting the

iv • Document Information — Ultra User Manual (v6.6)

Содержание Carbonite Ultra Series











































































































































































































Результаты поиска

Содержание Carbonite Ultra Series

Отзывы:

Похожие инструкции для Carbonite Ultra Series

Бренды по названию

Популярные бренды

Ross Carbonite Ultra Series, Руководство пользователя

Результаты поиска

Содержание Carbonite Ultra Series

Отзывы:

Похожие инструкции для Carbonite Ultra Series

Бренды по названию

Популярные бренды