Rosemount 3107, Справочное руководство

Страница: 50 / 148

40
Reference Manual
00809-0200-4840, Rev BA
Section 4: Configuration
December 2014
Section 4: Configuration
5. Follow the on-screen instructions to edit and save the new setting. (Press the Enter
( ) key if prompted to change the mode to “off-line”).
6. Select “ Quit ” to exit to the previous menu.
4.3.9 Distance offset (P060)
This defines the distance from the Sensor Reference Point (SRP) to the
User Preferred Sensor Reference Point (UPSRP).
Note

See Figure 4-1 on page 37 for these points in a tank geometry illustration.
The distance offset is subtracted from the live Distance value ( page 90 ) to produce the
read-only Distance / Tertiary Variable value (see page 86 ).
Note

The live Distance value is not affected by changes to the distance offset.
Field Communicator or AMS
To view or change the distance offset:
1. From the Home screen, select 2: Configure .
2. Select 2: Manual Setup .
3. Select 2: Level .
4. Select 2: Distance Offset P060 .
5. Input the new distance offset, and press “ ENTER ” to save it.
6. Press “ SEND ” to update the transmitter.
Note

When messages appear, take appropriate action if needed and press “ OK ”.
Rosemount 3490 Series Control Unit
To view or change the distance offset:
1. From the Main Menu screen, select SETUP .
2. Select the transmitter (e.g. “ Tx1: 3107 ”).
3. Select DUTY .
4. Select Distance Offset .
Fast Keys
2, 2, 2, 2
Distance Offset P060
0.000 ft
0.000 ft
ESC DEL ENTER HELP
w
s
q
a
z
Lock
Shift
@ &
á ü x
e
d
c
r
f
v
t
g
b
y
h
n
u
j
m
*
-
+
/
.
0
7
4
1
8
5
2
9
6
3
i
k
o
l FN
(Field Communicator Screen)
Distance Offset P060
0.0000ft
Esc=Quit =Edit
(Rosemount 3491 Screen)