Rosemount 3107, Справочное руководство

Страница: 85 / 148

75
Reference Manual
00809-0200-4840, Rev BA
Section 4: Configuration
December 2014
Section 4: Configuration
4.3.35 Clear false echoes (P089)
This is used to clear a specified False Echo Data record, or clear all of the
False Echo Data records. Options are:

“ False Echo 1 ”

“ False Echo 2 ”

“ False Echo 3 ”

“ False Echo 4 ”

“ All ”
Field Communicator or AMS
To clear false echo data:
1. From the Home screen, select 2: Configure .
2. Select 2: Manual Setup .
3. Select 6: False Echoes .
4. Select 5: Clear False Echoes .
5. Select “ All ” or a numbered false echo record, and then press “ ENTER ”
to confirm the selection.
6. Press “ SEND ” to update the transmitter.
Note

When messages appear, take appropriate action if needed and press “ OK ”.
Rosemount 3490 Series Control Unit
To clear false echo data:
1. From the Main Menu screen, select SETUP .
2. Select the transmitter (e.g. “ Tx1: 3107 ”).
3. Select ENGINEERING , and then select FALSE ECHO ACTION .
4. Select Clear False Echoes .
5. Select “ Edit ” ( ), then select an option using the up-arrow or down-arrow keys, and
finally select “ Save ” ( ) to confirm the selection.
(Press the Enter ( ) key if prompted to change the mode to “off-line”).
6. When finished, select “ Quit ” to exit to the previous menu.
Fast Keys
2, 2, 6, 5
Select false echo to clear
False Echo 1
False Echo 2
False Echo 3
False Echo 4
All
All
ENTER ESC
(Field Communicator Screen)
Clr False Echo P089
Esc=Quit =Edit
(Rosemount 3491 Screen)