Rosemount 3107, Справочное руководство

Страница: 41 / 148

31
Reference Manual
00809-0200-4840, Rev BA
Section 4: Configuration
December 2014
Section 4: Configuration
5. Follow the on-screen instructions to start the re-calibration feature.
(Press the
Enter ( ) key if prompted to change the mode to “off-line”).
6. Input the measured mA from the reference meter, and select “ Save ”.
7. Select the “ Quit ” instruction to exit.
To re-calibrate the 20mA output current:
1. From the Main Menu screen, select SETUP .
2. Select the transmitter (e.g. “ Tx1: 3107 ”).
3. Select SYSTEM , select TRIM ,
and then select Trim 20mA .
4. Follow the on-screen instructions to start the re-calibration feature.
(Press the
Enter ( ) key if prompted to change the mode to “off-line”).
5. Measure the actual output current , and input that new value.
6. Select “ Quit ” to exit to the previous menu.
4.3 Configuration parameters
4.3.1 Message (P000)
This allows a general 32-character message to be edited (12 characters if using a Rosemount
3490 Series Control Unit). It can be used for any purpose, such as recording the initials of the
person who programmed it, a support contact number, details of last programming change,
etc.
Field Communicator or AMS
To view or change the message:
1. From the Home screen, select 2: Configure .
2. Select 2: Manual Setup .
3. Select 4: HART / Identity .
4. Select 1: Identity .
5. Select 3: Message P000 .
6. Input the new message, and then press “ ENTER ” to save it.
7. Press “ SEND ” to update the transmitter.
Fast Keys
2, 2, 4, 1, 3
Esc=Quit =Start
TRIM 20mA
(Rosemount 3491 Screen)
Message P000
MESSAGE
MESSAGE
ESC DEL ENTER HELP
w
s
q
a
z
Lock
Shift
@ &
á ü
x
e
d
c
r
f
v
t
g
b
y
h
n
u
j
m
*
-
+
/
.
0
7
4
1
8
5
2
9
6
3
i
k
o
l FN
(Field Communicator Screen)