64
Reference Manual
00809-0200-4840, Rev BA
December 2014
Section 4: Configuration
Field Communicator or AMS
To view or change the temperature setting:
1.
From the
Home
screen, select
2: Configure
.
2.
Select
2: Manual Setup
.
3.
Select
8: Set Temperature
.
4.
Select
1: Temperature
.
5.
Select
4: Set Temperature
.
6.
Select
1: Set to Automatic (NaN)
for automatic (dynamic) corrections.
7.
Alternatively, select
2: Edit to fix temperature
, input a temperature, and then save it
by pressing “
ENTER
”.
Note
When messages appear, take appropriate action if needed and press “
OK
”.
The Fast Key sequence 2, 2, 8, 1 indicates if the
internal temperature sensor
or the
remote
temperature sensor
is in use (
OFF/ON
), and if the temperature is fixed (
OFF
/
ON
).
Rosemount 3490 Series Control Unit
To view or change the temperature setting:
1.
From the
Main Menu
screen, select
SETUP
.
2.
Select the transmitter (e.g. “
Tx1: 3107
”).
3.
Select
ENGINEERING
., and then select
Temperature
.
4.
Follow the on-screen instructions to edit and save the new setting.
(Press the
Enter
(
) key if prompted to change the mode to “off-line”).
5.
Select “
Quit
” to exit to the previous menu.
4.3.25
Set threshold (P026)
This sets the sensitivity of the echo detection circuits in the transmitter. The threshold is a
percentage defining the minimum signal level, above which an echo is detected and treated as a
potentially valid surface or target.
When the threshold is set to “
Auto
”, the sensitivity is automatically adjusted over a range of
values, depending on the echo strengths being received. The threshold is adjusted to one
quarter of the peak value of the largest signal detected to give best overall performance. The
live value is indicated in the read-only
Threshold In Use
parameter (
).
The threshold can be a constant value, which may be needed to overcome on-site difficulties or
special conditions.
Fast Keys
2, 2, 8, 2, 2
Set Temperature (NaN degF)
NaN
ESC
DEL
ENTER
HELP
w
s
q
a
z
Lock
Shift
@ &
á ü
x
e
d
c
r
f
v
t
g
b
y
h
n
u
j
m
*
-
+
/
.
0
7
4
1
8
5
2
9
6
3
i
k
o
l
FN
(Field Communicator Screen)
Temperature P025
Auto
F
Esc=Quit =Edit
(Rosemount 3491 Screen)
Содержание 3107
