79
Using System Effects
Reverb/Chorus/Delay
The System effects of the SC-8850 include 8 types of reverb and chorus, and 10 types
of delay. In addition, for each of these effects you can specify parameter values such
as character, depth, rate, and time. For these effects, you can set the overall level for
all Parts and also individual levels for each Part.
Reverb
Reverb is an effect that adds reverberation to a sound, as you would hear in a concert
hall.
Chorus
Chorus broadens the spatial image of the sound, adding depth and richness.
Delay
Delay creates echoes. It is also possible to give depth and width to a sound by adding
a short delay to the original sound.
■
Set Parameters for the Reverb/Chorus/Delay
Type and Amount (Level)
To activate a System effect, for each part you have to specify how much of the sound
is to be routed through the effects, by setting the
Send Level
. If the unit is still at the
factory settings, you should raise the Chorus Send Level and Delay Send Level. For
details on how to set the Send Level, refer to p.51, 54.
1
Press [EFFECTS] to turn it on.
2
Press [REVERB] ([F1]), [CHORUS] ([F2]), or [DELAY] ([F3]) to select an
effect type you want to modify.
fig.8-1
3
Press
VAR.
[
] or
INST
[
] to move the cursor up and down, and select
the parameter you want to modify
4
Rotate the [VALUE] knob, or press [DEC] or [INC] to set the value for the
parameter.
For settings for each Part,
this will be the Send Level.
In the case of a part for
which an insertion effect is
turned on, it is not possible
to independently set the
send level to the system
effects. A common level
will be used by all parts for
which an insertion effect is
turned on (p.89).
For details on each
parameter, refer to p.80.
Содержание Sound Canvas SC-8850
Страница 256: ...SC 8850 Owner s Manual 01891545 00 7 A3 31N...