124
Using Insertion Effects
RT H Slow (RT High Frequency Slow Rate)
0.05–10.0 [10 (40 03 0C)]
Adjusts the speed of the high-range rotor for the slow-
speed setting.
RT H Fast (RT High Frequency Fast Rate)
0.05–10.0 [11 (40 03 0D)]
Adjusts the speed of the high-range rotor for the fast-speed
setting.
RT Hi Accl (RT High Frequency Acceleration)
0–15 [12 (40 03 0E)]
Adjusts the time over which the rotation speed of the high-
range rotor will change from slow-speed to fast-speed (or
fast-speed to slow-speed) rotation. Smaller values will
require greater time to reach the new rotational speed.
RT Hi Lev (RT High Frequency Level)
0–127 [13 (40 03 0F)]
Adjusts the volume of the high-range rotor.
RT Sept (RT Separation)
0–127 [14 (40 03 10)]
Adjusts the spatial spread of the rotary sound.
#RT Speed
Slow/Fast [15 (40 03 11)]
Simultaneously switch the rotational speed of both the low-
range and the high-range rotors.
Slow:
Slow down the rotation to the specified
speeds (RT L Slow parameter/RT H Slow
parameter values).
Fast:
Speed up the rotation to the specified speeds
(RT L Fast parameter/RT H Fast parameter
values).
RT Pan (RT Output Pan)
L63–0–R63 [18 (40 03 14)]
Adjusts the stereo position of the rotary sound. L63 is far
left, 0 is center, and R63 is far right.
RT Level
0–127 [19 (40 03 15)]
Adjusts the volume of the rotary sound.
Level (Output Level)
0–127 [20 (40 03 16)]
Adjusts the output level.
61: OD/Phaser (Overdrive/Distortion, Phaser) [11H, 05H]
This connects an overdrive or distortion in parallel with a
phaser.
fig.9-66
●
OD (Overdrive/Distortion)
OD Sel (OD Select)
Odrv/Dist [1 (40 03 03)]
Selects either Overdrive or Distortion.
+OD Drive (OD Drive)
0–127 [2 (40 03 04)]
Adjusts the degree of distortion. The volume will change
together with the degree of distortion.
OD Amp (Overdrive Amp Simulator Type)
Smal/BltIn/2-Stk/3-Stk [3 (40 03 05)]
Selects the type of guitar amp.
Small:
small amp
BltIn:
single-unit type amp
2-Stk:
large double stack amp
3-Stk:
large triple stack amp
OD Amp Sw (OD Amp Switch)
Off/On [4 (40 03 06)]
Turns the OD Amp parameter on/off.
OD Pan (OD Output Pan)
L63–0–R63 [16 (40 03 12)]
Sets the stereo location of the overdrive or distortion sound.
L63 is far left, 0 is center, and R63 is far right.
OD Level
0–127 [17 (40 03 13)]
Adjusts the overdrive or distortion volume.
●
PH (Phaser)
PH Man (Phaser Manual)
100–8.0k [6 (40 03 08)]
Adjusts the center frequency at which the sound will be
modulated.
#PH Rate (Phaser Rate)
0.05–10.0 [7 (40 03 09)]
Adjusts the modulation speed.
PH Depth (Phaser Depth)
0–127 [8 (40 03 0A)]
Adjusts the modulation depth.
PH Reso (Phaser Resonance)
0–127 [9 (40 03 0B)]
Adjusts the emphasis for the region around the center
frequency specified by the PH Man parameter.
PH Mix (Phaser Mix Level)
0–127 [10 (40 03 0C)]
Adjusts the proportion of the phase-shifted sound that will
be mixed with the direct sound.
PH Pan (Phaser Output Pan) L63–0–R63 [18 (40 03 14)]
Sets the stereo location of the phaser sound. L63 is far left, 0
is center, and R63 is far right.
PH Level
0–127 [19 (40 03 15)]
Adjusts the volume of the phaser sound.
Level (Output Level)
0–127 [20 (40 03 16)]
Adjusts the output level.
L
R
Phaser
Overdrive/
Distortion
Pan
Pan
Содержание Sound Canvas SC-8850
Страница 256: ...SC 8850 Owner s Manual 01891545 00 7 A3 31N...