Roland Sound Canvas SC-8850, Руководство пользователя

Страница: 237 / 256

237
Appendices
Address(H) Size(H) Data(H) Parameter Default Value (H) Description
40 03 00 00 00 02 00 – 7F EFX TYPE 00 00 00: Thru
40 03 01#
40 03 03 00 00 01 00 – 7F EFX PARAMETER 1
40 03 04 00 00 01 00 – 7F EFX PARAMETER 2
40 03 05 00 00 01 00 – 7F EFX PARAMETER 3
40 03 06 00 00 01 00 – 7F EFX PARAMETER 4
40 03 07 00 00 01 00 – 7F EFX PARAMETER 5
40 03 08 00 00 01 00 – 7F EFX PARAMETER 6
40 03 09 00 00 01 00 – 7F EFX PARAMETER 7
40 03 0A 00 00 01 00 – 7F EFX PARAMETER 8
40 03 0B 00 00 01 00 – 7F EFX PARAMETER 9
40 03 0C 00 00 01 00 – 7F EFX PARAMETER 10
40 03 0D 00 00 01 00 – 7F EFX PARAMETER 11
40 03 0E 00 00 01 00 – 7F EFX PARAMETER 12
40 03 0F 00 00 01 00 – 7F EFX PARAMETER 13
40 03 10 00 00 01 00 – 7F EFX PARAMETER 14
40 03 11 00 00 01 00 – 7F EFX PARAMETER 15
40 03 12 00 00 01 00 – 7F EFX PARAMETER 16
40 03 13 00 00 01 00 – 7F EFX PARAMETER 17
40 03 14 00 00 01 00 – 7F EFX PARAMETER 18
40 03 15 00 00 01 00 – 7F EFX PARAMETER 19
40 03 16 00 00 01 00 – 7F EFX PARAMETER 20
* Regarding EFX TYPE and EFX PARAMETER, please refer to page 91, 216
Address(H) Size(H) Data(H) Parameter Description Default Value (H) Description
40 03 17 00 00 01 00 – 7F EFX SEND LEVEL TO REVERB 0-127 28 40
40 03 18 00 00 01 00 – 7F EFX SEND LEVEL TO CHORUS 0-127 00 0
40 03 19 00 00 01 00 – 7F EFX SEND LEVEL TO DELAY 0-127 00 0
40 03 1B 00 00 01 00 – 7F EFX CONTROL SOURCE1 Off, CC1-95, CAf, Bend 00 Off
40 03 1C 00 00 01 00 – 7F EFX CONTROL DEPTH1 -100 – 0 – +100 [%] 40 0 (%)
40 03 1D 00 00 01 00 – 7F EFX CONTROL SOURCE2 Off, CC1 – 95, CAf, Bend 00 Off
40 03 1E 00 00 01 00 – 7F EFX CONTROL DEPTH2 -100 – 0 – +100 [%] 40 0 (%)
40 03 1F 00 00 01 00 – 7F EFX SEND EQ SWITCH OFF/ON 01 ON
* EFX TYPE is a macro parameter which sets various Insertion Effect parameters as a group. When you use EFX TYPE to select an Insertion Effect type, each effect parameter will be set to the
most suitable value.
❍
Patch Part parameters
The SC-8850 has 16 Parts in Group A, Group B, Group C, and Group D respectively. Parameters that can be set individually for each Part are called Patch Part parameters. If you specify a part in
Group A, specify the address 40 ** ** using the block number to the corresponding part from PORT A (normally MIDI IN 1). If you specify a part in Group B, specify the address 40 ** ** using the
block number to the corresponding part from PORT B (normally MIDI IN 2).
If you use Exclusive messages to set Patch Part parameters, specify the address by Block number rather than Part Number (normally the same number as the MIDI channel). The Block number can
be specified as one of 16 blocks, from 0(H) to F(H).
The relation between Part number and Block number is as follows.
x...BLOCK NUMBER (0 – F), Part 1 (default MIDIch = 1) x=1
Part 2 (default MIDIch = 2) x=2
: : :
Part 9 (default MIDIch = 9) x=9
Part10 (default MIDIch =10) x=0
Part11 (default MIDIch =11) x=A
Part12 (default MIDIch =12) x=B
: : :
Part16 (default MIDIch =16) x=F
n... MIDI channel number (0 – F) of the BLOCK.
In the following map, the control numbers of the control changes are indicated as CC#.
Address(H) Size(H) Data(H) Parameter Description Default Value (H) Description
40 1x 00 00 00 02 00 – 7F TONE NUMBER CC#00 VALUE 0 – 127 00 0
40 1x 01# 00 – 7F P.C. VALUE 1 – 128 00 1
40 1x 02 00 00 01 00 – 10 Rx. CHANNEL 1 – 16, OFF Same as the Part Number
40 1x 03 00 00 01 00 – 01 Rx. PITCH BEND OFF/ON 01 ON
40 1x 04 00 00 01 00 – 01 Rx. CH PRESSURE(CAf) OFF/ON 01 ON
40 1x 05 00 00 01 00 – 01 Rx. PROGRAM CHANGE OFF/ON 01 ON
40 1x 06 00 00 01 00 – 01 Rx. CONTROL CHANGE OFF/ON 01 ON
40 1x 07 00 00 01 00 – 01 Rx. POLY PRESSURE(PAf) OFF/ON 01 ON
40 1x 08 00 00 01 00 – 01 Rx. NOTE MESSAGE OFF/ON 01 ON
40 1x 09 00 00 01 00 – 01 Rx. RPN OFF/ON 01 ON
40 1x 0A 00 00 01 00 – 01 Rx. NRPN OFF/ON 00 (01*) OFF (ON*)
* When “GM1 System On” and “GM2 System On” are received, Rx. NRPN will be set OFF. When “GS Reset” is received, it will be set ON.