background image

3

USING THE UNIT SAFELY

U

S

I

N

G

 

T

H

E

 

U

N

I

T

 

S

A

F

E

L

Y

001

• Before using this unit, make sure to read the

instructions below, and the Owner’s Manual.

..........................................................................................................

002a

• Do not open or perform any internal modifications

on the unit.

..........................................................................................................

003

• Do not attempt to repair the unit, or replace parts

within it (except when this manual provides
specific instructions directing you to do so). Refer
all servicing to your retailer, the nearest Roland
S e r v i c e   C e n t e r ,   o r   a n   a u t h o r i z e d   R o l a n d
distributor, as listed on the "Information" page.

..........................................................................................................

004

• Never use or store the unit in places that are:

• Subject to temperature extremes (e.g., direct

sunlight in an enclosed vehicle, near a heating
duct, on top of heat-generating equipment); or
are

• Damp (e.g., baths, washrooms, on wet floors);

or are

• Humid; or are

• Exposed to rain; or are

• Dusty; or are

• Subject to high levels of vibration.

..........................................................................................................

007

• Make sure you always have the unit placed so it is

level and sure to remain stable. Never place it on
stands that could wobble, or on inclined surfaces.

..........................................................................................................

008a

• The unit should be connected to a power supply

only of the type described in the operating instruc-
tions, or as marked on the unit.

..........................................................................................................

009

• Avoid damaging the power cord. Do not bend it

excessively, step on it, place heavy objects on it,
etc. A damaged cord can easily become a shock or
fire hazard. Never use a power cord after it has
been damaged.

..........................................................................................................

010

• This unit, either alone or in combination with an

amplifier and headphones or speakers, may be
capable of producing sound levels that could
cause permanent hearing loss.  Do not operate for
a long period of time at a high volume level, or at a
level that is uncomfortable.  If you experience any
hearing loss or ringing in the ears, you should
immediately stop using the unit, and consult an
audiologist.

..........................................................................................................

011

• Do not allow any objects (e.g., flammable material,

coins, pins); or liquids of any kind (water, soft
drinks, etc.) to penetrate the unit.

..........................................................................................................

013

• In households with small children, an adult

should provide supervision until the child is
capable of following all the rules essential for the
safe operation of the unit.

..........................................................................................................

014

• Protect the unit from strong impact.

 

(Do not drop it!)

..........................................................................................................

Used for instructions intended to alert 
the user to the risk of injury or material 
damage should the unit be used 
improperly. 

* Material damage refers to damage or 

other adverse effects caused with 
respect to the home and all its 
furnishings, as well to domestic 
animals or pets. 

Used for instructions intended to alert 
the user to the risk of death or severe 
injury should the unit be used 
improperly. 

The 

 symbol alerts the user to things that must be 

carried out. The specific thing that must be done is 
indicated by the design contained within the circle. In 
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet. 

The      symbol alerts the user to important instructions 
or warnings.The specific meaning of the symbol is 
determined by the design contained within the 
triangle. In the case of the symbol at left, it is used for 
general cautions, warnings, or alerts to danger. 

The       symbol alerts the user to items that must never 
be carried out (are forbidden). The specific thing that 
must not be done is indicated by the design contained 
within the circle. In the case of the symbol at left, it 
means that the unit must never be disassembled. 

Содержание Sound Canvas SC-8850

































































































































































































































































Отзывы: