238
Appendices
Address(H)
Size(H)
Data(H)
Parameter
Description
Default Value (H)
Description
40 1x 0B
00 00 01
00 – 01
Rx. MODULATION
OFF/ON
01
ON
40 1x 0C
00 00 01
00 – 01
Rx. VOLUME
OFF/ON
01
ON
40 1x 0D
00 00 01
00 – 01
Rx. PANPOT
OFF/ON
01
ON
40 1x 0E
00 00 01
00 – 01
Rx. EXPRESSION
OFF/ON
01
ON
40 1x 0F
00 00 01
00 – 01
Rx. HOLD1
OFF/ON
01
ON
40 1x 10
00 00 01
00 – 01
Rx. PORTAMENTO
OFF/ON
01
ON
40 1x 11
00 00 01
00 – 01
Rx. SOSTENUTO
OFF/ON
01
ON
40 1x 12
00 00 01
00 – 01
Rx. SOFT
OFF/ON
01
ON
40 1x 13
00 00 01
00 – 01
MONO/POLY MODE
Mono/Poly
01
Poly
(=CC# 126 01/CC# 127 00)
40 1x 14
00 00 01
00 – 02
ASSIGN MODE
0 = SINGLE
SC-8850/SC-88Pro/SC-88 MAP
1 = LIMITED-MULTI
01
LIMITED-MULTI
2 = FULL-MULTI
SC-55 MAP
00 at x=0
SINGLE (Drum Part)
01 at x
≠
0
LIMITED-MULTI (Normal Part)
Single : If the same note is played multiple times in succession, the previously-sounding note will be completely silenced, and then the new note will be sounded.
LimitedMulti : If the same note is played multiple times in succession, the previously-sounding note will be continued to a certain extent even after the new note is sounded. (Default setting)
FullMulti : If the same note is played multiple times in succession, the previously-sounding note(s) will continue sounding for their natural length even after the new note is sounded.
*
ASSIGN MODE is the parameter that determines how voice assignment will be handled when sounds overlap on identical note numbers in the same channel (i.e., repeatedly struck notes).
This is initialized to a mode suitable for each Part, so for general purposes there is no need to change this.
40 1x 15
00 00 01
00 – 02
USE FOR RHYTHM PART
0 = OFF
00 at
≠
0
OFF (Normal Part)
1 = MAP1
01 at x=0
MAP1 (Drum Part)
2 = MAP2
*
This parameter sets the Drum Map of the Part used as the Drum Part. The SC-8850 can simultaneously (in different Parts) use up to two Drum Maps (MAP1, MAP2). With the initial settings,
Part10 (MIDI CH=10, x=0) is set to MAP1 (1), and other Parts are set to normal instrumental Parts (OFF(0)).
Address(H)
Size(H)
Data(H)
Parameter
Description
Default Value (H)
Description
40 1x 16
00 00 01
28 – 58
PITCH KEY SHIFT
-24 – +24 [semitones]
40
0 [semitones]
40 1x 17
00 00 02
08 – F8
PITCH OFFSET FINE
-12.0 – +12.0 [Hz]
08 00
0 [Hz]
40 1x 18#
Use nibblized data.
*
PITCH OFFSET FINE allows you to alter, by a specified frequency amount, the pitch at which notes will sound. This parameter differs from the conventional Fine Tuning (RPN #1) parameter
in that the amount of frequency alteration (in Hertz) will be identical no matter which note is played. When a multiple number of Parts, each of which has been given a different setting for
PITCH OFFSET FINE, are sounded by means of an identical note number, you can obtain a Celeste effect.
40 1x 19
00 00 01
00 – 7F
PART LEVEL
0 – 127
64
100
(=CC# 7)
40 1x 1A
00 00 01
00 – 7F
VELOCITY SENSE DEPTH
0 – 127
40
64
40 1x 1B
00 00 01
00 – 7F
VELOCITY SENSE OFFSET
0 – 127
40
64
40 1x 1C
00 00 01
00 – 7F
PART PANPOT
-64 (RANDOM),
40
0 (CENTER)
-63 (LEFT) – +63 (RIGHT)
(=CC# 10, except RANDOM)
40 1x 1D
00 00 01
00 – 7F
KEYBOARD RANGE LOW
(C-1) – (G9)
00
C-1
40 1x 1E
00 00 01
00 – 7F
KEYBOARD RANGE HIGH
(C-1) – (G9)
7F
G 9
40 1x 1F
00 00 01
00 – 5F
CC1 CONTROLLER NUMBER
0 – 95
10
16
40 1x 20
00 00 01
00 – 5F
CC2 CONTROLLER NUMBER
0 – 95
11
17
40 1x 21
00 00 01
00 – 7F
CHORUS SEND LEVEL
0 – 127
00
0
(=CC# 93)
40 1x 22
00 00 01
00 – 7F
REVERB SEND LEVEL
0 – 127
28
40
(=CC# 91)
40 1x 23
00 00 01
00 – 01
Rx.BANK SELECT
OFF/ON
01(00*)
ON(OFF*)
*
When “GM1 System On” is received, Rx.BANK SELECT will be set OFF.
*
When “GS RESET” or “GM2 System On” is received, Rx.BANK SELECT will be set ON.
40 1x 24
00 00 01
00 – 01
RX BANK SELECT LSB
OFF/ON
01
ON
*
When RX BANK SELECT LSB = OFF, Bank Select LSB (Bn 20 11) will be treated as 00H regardless of its value.
40 1x 2A
00 00 02
00 00 – 40 00 – 7F 7F
PITCH FINE TUNE
-100 – 0 – +100 [cents]
40 00
0
(= RPN#1)
40 1x 2B#
40 1x 2C
00 00 01
00 – 7F
DELAY SEND LEVEL
0-127
00
0
(=CC# 94)
40 1x 30
00 00 01
00 – 7F
TONE MODIFY1
-64 – +63
40
0
Vibrato Rate
(=NRPN# 8/CC#76)
40 1x 31
00 00 01
00 – 7F
TONE MODIFY2
-64 – +63
40
0
Vibrato Depth
(=NRPN# 9/CC#77)
40 1x 32
00 00 01
00 – 7F
TONE MODIFY3
-64 – +63
40
0
TVF Cutoff Freq
(=NRPN# 32/CC#74)
Содержание Sound Canvas SC-8850
Страница 256: ...SC 8850 Owner s Manual 01891545 00 7 A3 31N...