Info
When purchased as a kit, the AirPick Vacuum Gripper will come in a package with the appropriate coupling, suction cups
and cabling. Please refer to the Spare Parts, Kits and Accessories section for additional components.
3.2. Required Tools and Equipment
3.2.1. AirPick Gripper Add-On
The following tools are required to install the Vacuum Gripper:
l
Hex key to mount the coupling onto the robot, according to your coupling
l
4 mm hex key to mount the Vacuum Gripper onto its coupling .
3.2.2. Suction cup system
The following tool is required to install the Suction cup system on the Vacuum Gripper:
l
4 mm hex key to assemble together the suction cup system and the vacuum generator.
3.3. Environmental and Operating Conditions
CONDITION
VALUE
Minimum storage/transit
temperature
-30°C [-22°F]
Maximum storage/transit
temperature
60°C [140°F]
Minimum operating temperature
0°C [32°F]
Maximum operating temperature
50°C [122°F]
Humidity (non-condensing)
20-80% RH
IP Rating
IP 4X
Table 3-1: Environmental and operating conditions of the AirPick Vacuum Gripper
17
Содержание AirPick
