RINCO ULTRASONICS AG Standard 3000 Скачать руководство пользователя страница 48

Страница: 48 / 137

4 | Transport, packaging and storage

RINCO ULTRASONICS AG

48 / 137

BA_Standard3000_GB_V5.1_36566

Delivery (packaging/packages)

The packaging serves to protect the machine until the time of assembly and

should protect it against transportation damage, corrosion and other dama-

ge. For this reason, do not dispose of the packaging and only remove it

immediately before assembly. The transport packaging withstands the

normal loads during transport by road, rail and air.
In order to transport the press, it is screwed to the pallet on the rear side.

Unscrew the transport locking screws before transporting by crane.

The sound enclosure is transported on a pallet with wooden panels on all

sides.
We recommend you keep the packaging materials for future transport.
If packaging materials are no longer required, packaging materials can be

disposed of in accordance with the applicable statutory regulations and local

regulations.

NOTICE

Incorrect disposal.

Danger of environmental damage!

• Dispose of packaging materials in an environmentally-

friendly way.

4.2

Packaging

Storage for later transport
Disposal of packaging materials

Содержание Standard 3000










































































































































Результаты поиска

Содержание Standard 3000

Отзывы:

Похожие инструкции для Standard 3000

Бренды по названию

Популярные бренды

RINCO ULTRASONICS AG Standard 3000, Руководство по эксплуатации

Результаты поиска

Содержание Standard 3000

Отзывы:

Похожие инструкции для Standard 3000

Бренды по названию

Популярные бренды