RINCO ULTRASONICS AG
Faults | 8
BA_Standard3000_GB_V5.1_36566
109 / 137
Error limits
S.:
No. Error message
Cause
Measures
005: 000 Max. limit time exceeded
The set maximum time
value for the limit has been
exceeded
▪ If the error occurs repeatedly, the
limit setting must be corrected
005: 001 Time limit has dropped
below limit
The set minimum time
value for the limit has
dropped below the limit
▪ If the error occurs repeatedly, the
limit setting must be corrected
005: 002 Max. energy limit exceeded The set maximum energy
value for the limit time has
been exceeded
▪ If the error occurs repeatedly, the
limit setting must be corrected
005: 003 Min. limit energy dropped
below limit
The set minimum energy
value for the limit has
dropped below the limit
▪ If the error occurs repeatedly, the
limit setting must be corrected
005: 004 Max. limit power exceeded The set maximum power
value for the limit has been
exceeded
▪ If the error occurs repeatedly, the
limit setting must be corrected
005: 005 Min. limit power dropped
below limit
The set minimum energy
value for the limit has
dropped below the limit
▪ If the error occurs repeatedly, the
limit setting must be corrected
005: 006 Max. travel limit exceeded The permissible maximum
value of "travel absolute"
has been exceeded.
▪ If the error occurs repeatedly, the
limit setting must be corrected
005: 007 Min. travel limit dropped
below limit
The permissible minimum
value of "travel absolute"
has dropped below the limit.
▪ If the error occurs repeatedly, the
limit setting must be corrected
005: 008 Max. travel differential limit
exceeded
The permissible maximum
value of "travel differential"
has been exceeded
▪ If the error occurs repeatedly, the
limit setting must be corrected
005: 009 Min. travel differential limit
dropped below limit
The permissible minimum
value of "travel differential"
has dropped below the limit
▪ If the error occurs repeatedly, the
limit setting must be corrected
005: 010 Workpiece counter reached The set number of workpie-
ces has been reached
▪ Delete workpiece number
▪ Correct workpiece counter
Tab. 34:
Error limits
8.5.4
