List of figures
RINCO ULTRASONICS AG
134 / 137
BA_Standard3000_GB_V5.1_36566
Fig. 44 Process steps of ADG generator with sound enclosure
71
Fig. 45 ADG with special actuators
72
Fig. 46 Process sequence
72
Fig. 47 Start signals
75
Fig. 48 Data string
84
Fig. 49 Oscillator system
87
Fig. 50 Replacing the booster
88
Fig. 51 Tool
88
Fig. 52 Setting the fine adjustment screw
88
Fig. 53 Releasing the clamping lever
88
Fig. 54 EMERGENCY STOP button
89
Fig. 55 Manual check valve
89
Fig. 56 Lowering with two-hand release
89
Fig. 57 Centring the anvil
89
Fig. 58 Releasing the clamping lever
90
Fig. 59 Tightening the clamping lever
90
Fig. 60 Tightening the clamps
90
Fig. 61 Lifting with two-hand release
90
Fig. 62 Aligning the fixing plate
91
Fig. 63 Generator control console
93
Fig. 64 Manual check valve
93
Fig. 65 Parts to be cleaned
97
Fig. 66 Fixing plate
97
Fig. 67 Oscillator system, danger of electric shock
98
Fig. 68 Oscillator system assembly
98
Fig. 69 Press dimensions
119
Fig. 70 Sound enclosure dimensions
120
Fig. 71 Generator front
123
Fig. 72 Installation position of generator fuses
123
Fig. 73 Generator fuses dimensions
123
Fig. 74 Internal resistance analogue input
125
Fig. 75 Internal resistance analogue output
125
Fig. 76 Pin assignment inputs at STO_2_1 (DSUB25)
127
Fig. 77 Pin assignment outputs at STO_2_2 (DSUB25)
128
Fig. 78 Pin assignment press at STO_3
129
Fig. 79 Circuit diagram press at STO_3
129
Fig. 80 Pin assignment two-hand release at STO_5
130
Fig. 81 Circuit diagram two-hand release at STO_5
130
