Riken Keiki OHC-800, Руководство по эксплуатации

Страница: 62 / 88

6 How to Operate in SETUP MODE 6-2. Items and details
62 / 87
6-2-13. Password change (PASSWORD SETUP (SETUP MODE))
Change the password required to enter SETUP MODE. In the menu screen, press the SET key to display
the setting value check screen and display the current password setting. Next, press the SET key to display
the password input screen and enter characters 0 to 9 and A to F one by one using the
▲▼ and SET keys.
Menu screen Setting value check
screen
Input screen
6-2-14. Log data download (IrDA COMMUNICATION)
Using IrDA, and perform downloading log data. When enter into this screen, data logging function stops
temporarily. In the menu screen, press the SET key to display the STANDBY screen. The timing is off,
display the CAUTION screen as the following screen. During the log data writing, it cannot download.
Perform 10 to 30 seconds later, again.
Menu screen
STANDBY screen CAUTION screen
Prepare for a communication equipment (GX-2009 TYPE-DL etc.) in STANDBY screen state.
After start communicating in communication device, select the START using
▲▼
key, and press SET key.
If communications establish normally, it is to be data transmission screen automatically and answer to
request-to-send from communication device. When communications do not establish, when
communications is interrupted, when ESC key is pressed during communications, when all communications
end and data transmission request-to-send run out, resume STANDBY screen.
STANDBY screen Confirmed
communication
screen
Data transmission
screen
NOTE
It is optional service to download and analyze log data, and exclusive jigs are necessary. As for details,
refer to 7-3 and contact RIKEN KEIKI.
CAUTION
Note that you cannot enter the SETUP MODE without the password specified here. If you forget the
password, contact RIKEN KEIKI.