Riken Keiki OHC-800, Руководство по эксплуатации

Страница: 36 / 88

4 How to Operate in MEASURING MODE 4-3. Switching to other mode
36 / 87
4-3. Switching to other mode
During measurement, press and hold the MODE key for three seconds or longer to display the MODE
CHANGE screen.
MEASURING MODE screen
3 seconds or
longer
MODE CHANGE screen
In this MODE CHANGE screen, move the cursor (black bar) using the
▲▼ keys to select a desired mode
and confirm it using the SET key to enter each mode.
The screen and details of each mode are shown in the table below.
Mode Screen Details
CHECK MODE
Used to display or check the operation status or
setting conditions of each unit while continuing
measurement.
In this mode, 4 - 20 mA signals are output without
stopping measurement.
SETUP MODE
Used to specify the settings of the calorimeter such
as how to calculate "Calorific value" and "Density"
and the condition settings for 4 - 20 mA output
signals.
Prompts the user for password input because
measurement is stopped in this mode.
FACTORY MODE
Used for factory adjustment, maintenance, or
start-up.
This mode is for exclusive use by RIKEN KEIKI and
service engineer designated by RIKEN KEIKI, and
normally must not be operated by the user.
Prompts the user for password input because
measurement is stopped in this mode.
MEASURING MODE
Used to return to the normal MEASURING MODE
screen.