Ricoh LI-MF1 M126, Руководство по обслуживанию на месте

Страница: 278 / 324

Step Questions / actions Yes No
13
Check the device that cannot receive a
fax. Can it send a fax?
Go to step 14.
Stop here. The issue is
with the other device.
14
Press **411 to enter the Fax/SE Menu.
Select “Print Logs”.
Print the T30 transmission log. Check the
error being reported with the fax error
code table. See “Fax Error Codes” in
“Troubleshooting”. Perform the suggested
resolution for the error.
Did this fix the problem?
Problem resolved. Go to step 15.
15
Adjust the “Transmit Level” setting in the
SE menu. Press **411 to enter the SE
menu, enter Modem settings, and select
“Transmit Level”.
Test by adjusting the transmitted signal
strength by decreasing/increasing the
‘Transmit Level’ setting in steps of 1db.
For example, if default value is -11 db,
changing it to -12db will decrease the
signal strength by 1db, and changing it to
-10db will increase the signal strength by
1db. Recommended adjustment range is
±5 db (in 1db steps) from the default
value.
Did this fix the problem?
Stop. Problem
resolved.
Go to your second-
level of support ( p.
279 "Escalating a
Fax Issue to Second-
Level Support").
Fax Reception Service Check
Step Questions / actions Yes No
1
Is the phone line properly connected to
the modem card and the wall jack?
Go to step 3. Go to step 2.
2
Properly connect the phone line to the
modem card and wall jack.
Did this fix the problem?
Problem resolved. Go to step 3.
6. Troubleshooting
276
6