manualshive.com logo in svg

Ricoh LI-MF1 M126, Руководство по обслуживанию на месте

Поделиться
Скачать
Ricoh LI-MF1 M126 Скачать руководство пользователя страница 208

User primary message

Explanation

56 Serial Port <x> disabled

This error displays when data is sent to the machine across a serial
port, but the port has been disabled. Once this message displays,
reporting of further errors is suppressed until the menus are entered,
or the machine is reset.

56 Standard USB
PortDisabled

This message may appear when data is sent to the machine across a
USB port, but the port is disabled.

• Once the error is displayed the first time, reporting of further

errors is suppressed until the machine is reset or menus are
entered.

The following actions can be taken:

• Press "Select" ( ) to clear the message.

Any data received on the USB port is discarded.

• Press "Menus" ( ) to access the Busy/Waiting Menu.

The following functions may be available:
-Turn the machine power off and then back on to reset the
machine.
-Reset Active Bin
-Check Supply Levels

Make sure the USB Buffer menu item is not set to Disabled. (Press
"Menus"   to access the Administrative Menus, select "Network/
Ports", "USB Menu", and "USB Buffer".)

58 Too many Flash Options
Installed

1. Turn off and unplug the machine.
2. Remove the excess flash memory.
3. Plug in the machine, and turn it on.

58 Too Many TraysAttached

1. Turn off and unplug the machine.
2. Remove the additional trays.
3. Plug in the machine, and turn it on.

6. Troubleshooting

206

6

Содержание LI-MF1 M126





































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды