Ricoh e-Sharing Box, Руководство по эксплуатации

Страница: 103 / 136

Status lamp Function lamp HDD1/2 lamp Beep patterns Status
Lights green Lights blue Flashes green Copying data in the hard disk.
If you replace the hard disk, it
takes a few hours to copy the
data. After copying is
complete, the HDD lamp lights
up green.
The machine can be used while
data is being copied.
Flashes green Lights or
flashes green One short
beep System is shutting down or
rebooting.
Lights green Lights blue HDD1 or 2:
Lights red Four long
beeps
(repeated) The hard disk has
malfunctioned.
The lamp of the malfunctioning
hard disk lights up red.
Contact your service
representative.
Lights green Turns off HDD1 or 2:
No light Two short
beeps
(repeated) The hard disk cannot operate
normally. Contact your service
representative.
Lights red There is the same host name or
IP address on the network.
Specify an unused host name
or IP address.
If the error is not resolved,
contact your service
representative.
Lights red Cannot get an IP address from
the DHCP server. Check the
network environment.
If the error is not resolved,
contact your service
representative.
Flashes green Flashes blue Lights green Programs are being updated.
Troubleshooting
101