北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd.
35
Forging ahead, create future together!
5.4
Auto processing operation
Auto processing refers to the system runs according to the instruction of the file in U disk or
inner storage space, it also called “file processing”. Before auto processing, user must set the
machine tool parameters and all of the system parameters correctly.
Auto processing steps could refer to the following text.
5.4.1
Set workpiece origin
The origin coordinates of X, Y and Z axis in the processing program is workpiece origin.
Before processing, we should pay attention to this position as well as
the real position. Operation is as follow:
Move X, Y and Z to the position which will start to process the file on workpiece. Afterwards,
press zero clearing “
” can set the workpiece origin of X, Y axis. Press zero clearing
“
” can set the origin of Z and A axis. It should be noted that if user have already used the
automatically tool setting function which single key is “
” will no need to press “
”.
5.4.2
Choose processing file
After determined the workpiece origin, press“
” will appears a dialog:
Press “
and
”to move the cursor and choose, press “
”to enter into the
SelectWorkFile
Internal File
Recent File
U Disk File
