RichAuto AutoNow B18, Руководство пользователя

Страница: 41 / 75

北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd.
36
Forging ahead, create future together!
list, the screen will display three file name, choose the file by pressing “ and
”. Press “ and ”to open the next page. Press “ ” to exit.
5.4.3 Set processing parameters
After choosing the processing file please press“ ”,enter into processing parameters
setting, it includes work speed
、
travel speed
（
or Fast speed
） 、
speed scale(speed ratio)
、
fall down
speed(or Z down ratio)
Press “ and ” to move cursor, press “ ” to set the value (next value
setting is in the same way), then press “ ” to save, the system will check the processing
codes and start to run when the reviewing is completed.
The system code checking is auto mode, user can press “ ” to skip the checking and
start to run immediately.
System will remember the checking only when the previous checking is a complete and
correct checking. So that the system won’t check the same code again next time.
During processing, the screen scrolling display real-time processing speed, operation time
and current line number. We can switch these options by pressing “ ”.
Set Work Param
WorkSpd 3000.000
FastSpd 3000.000
SpdScale 1.000
FallDown 0.200