北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd.
64
Forging ahead, create future together!
Unable to read U flash disk or read error occurs
1)
Processing by U-disk, screen shows “there is no item in this option”. Format U-disk to FAT32,
change allocation unit to the default configuration size. Then re-import processing files, it
will read normally.
2)
U flash disk capacity is too large (16G, 32G or 64G etc.). Recommend replace U disks such as
2G
、
4G
、
8G.
3)
There is something wrong with USB communicate port or U-disk interface is broken
，
change
a new USB port or U-disk.
4)
There is no any reaction while insert into the U-disk. Change a genuine brand of U-disk, such
as SanDisk, FOUNDER U-disk etc.
5)
If the U-disk interface is weak connection
，
user can copy files into inner memory space of
the controller for temporary solution.
6)
Program contains non-standard G codes, or some illegal characters. The system does not
recognize them and interrupt handling. Recommend using professional simulation software
to review the program whether there is an illegal character. Delete all illegal characters.
11.2
FAQ in practical operation
After the machining, the cutting size doesn’t match the actual size in processing file
1)
Pulse equivalent is wrong.
2)
User has selected the wrong tool bit which is not the same as it set in process file.
3)
Check if there is any problem with the path processing file.
The screen displays “exceed limit” during processing
1)
The machine hasn’t returned ZERO, lead the system is unable to confirm the actual
position. Solution is to go machine ZERO.
2)
The reserved processing range is small than the actual file size after user set work piece
origin. Confirm the actual file size and then set a correct working origin.
3)
Set wrong working origin in the process of creating processing file path. Check the file path,
