北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd.
32
Forging ahead, create future together!
The cursor is on “X SLOW”, Press “
and
” to the one needs to be modified,
and press “
” then input new value, and next press “
” to confirm; Press
“
” to exit the settings. If the input value is wrong, press “
” delete the last
number and then input new numbers.
To ensure the accuracy of processing and debugging, the system introduces the concept of ‘grid’
which also called ‘minimum feed rate’. Precision can reach to 0.001mm.When user switch to
“step” mode, and press the direction keys of X, Y, Z axis, machine will move by grid distance.
High speed mode setting is the same to low speed mode.
5.3.2
Manual processing mode
The system provides 3 manual movement modes: Continue, step, distance. User could press
“
” under manual mode to switch manual movement mode and view the current
movement mode through the screen bottom display status.
1)
Continue (Continuous motion mode)
No specific data control, user could press motion direction key of each axis
（
,
,
,
,
,
）
the machine will move accordingly
until the key is released. The motion speed is determined by current manual speed mode.
2)
Step motion mode
In step mode, move 1 grid every half second. The grid distance is determined by the current
speed mode. It is suitable for precise adjusting the cutter or fine adjusting the location of the
mechanical coordinate.
3)
Distance motion mode
It runs a certain distance according to the setting. Press motion direction keys
Manual Param
X SLOW
1200.000
Y SLOW
1200.000
Z SLOW
1200.000
Z SLOW
1200.000
Slow Grid
0.100
A
低速
1200.000
低速网格
0.100
