Rhima DVS, Руководство оператора

Страница: 8 / 44

Operative Instructions
8
2.6 Technical data
Description Dimensions
Width
600 mm
23.6"
Depth with
door closed
450 mm
17.7"
Height*
1650 mm
65"
Weight*
100 kg
220 lbs.
*The height and weight may vary depending on the
configuration.
Protection absorbed
power voltage
See data plate and the
Technical Specifications (see
pg. 2)
Max dBA noise during
wash phases
<54 dB (A)
Type of protection
(according to IEC
60529)
IP20
IP: International Protection.
Against ingress of solid
foreign objects: ≥ 12,5 mm
diameter.
Against ingress of water
with harmful effects: 0
(non-protected).
CE marking
Directive on medical devices
93/42/EEC, class IIa
At the end of each cycle, a residue volume of water
remains inside the machine, as specified below:
• steam generator 0.4 l (0.11 US gal.)
2.7 Pictograms specification
Each bedpan washer is equipped with hazard
pictograms. The following table shows the symbols
used.
Symbol Description
Hot parts
Electrical shock
Ground mass
Equipotential
2.8 Main components of the machine
3
1
5
4
7
8
10
11
2
9
6
Fig. 2
1) Automatic or manual st
ainless steel door.
2) Door opening handle.
3) Control panel.
4) N.T.T. sensor.
5) Upper/side stainless steel panel with key lock, for
maintenance and to access to the settings button.
In the version with NTT, the upper panel is made of
glass.
6) Emergency button.
7) Lower stainless steel panel with key lock, for
maintenance.
8) Machine label placed behind the lower stainless
steel panel.
9) Pedal control.
10) Machine label placed inside the bottom panel.
11) Machine label placed on the right lateral side.
2.9 Supports
The machine leaves the factory without any supports .