Rhima DVS, Руководство оператора

Страница: 29 / 44

Operative Instructions
29
cap indicates the type of liquid contained in the drum.
A message on the display warns when the liquid is
getting low and when it is totally finished.
Moreover, the machine has a volumetric meter, which
controls the quantity of passing liquid. This is another
control system: the meter stops the working cycle
and the display will show an alarm every time that
the dispenser pump doesn’t work well or the liquid is
totally finished.
9.3 What to do if the machine hasn’t been
used for a long time
9.3.1 Storage tank
If the machine hasn’t been used for a long time without
electrical supply, it is good to empty manually the
storage tank using the drainage valve under it: in this
way the proliferating of bacteria is avoid.
In every 15883 machine this operation is automatic
every time the machine doesn’t work for a long time,
even without electrical supply.
9.3.2 Steam generator
If the machine hasn’t been used for a long time without
electrical supply, it is good to empty manually the
steam generator using the drainage cap under it: in this
way the proliferating of bacteria is avoid.
9.4 Routine maintenance
Routine maintenance operations are performed by
the user and includes all those jobs needed to keep
the machine clean and functioning. It is mandatory to
perform these operations regularly or when necessary
and the user is responsible for verifying their regularity.
For routine maintenance operations refer to the
Maintenance Logbook provided in the machine's pack.
a
WARNING ! it is the user's obligation to
fill in the Maintenance Logbook correctly
and regularly. The incorrect or incomplete
compilation of the Maintenance Logbook
will void the warranty.
9.4.1 Cleaning the human waste containers hook/
support and machine's surfaces
Sometimes it may be necessary to remove the
human waste containers hook/support to replace it
or to perform routine, extraordinary maintenance or
cleaning. To remove the support just pull it towards
yourself until the support connections are released
from their two anchor plates. To reinsert the support
perform this operation in reverse order.
For machine's surfaces cleaning follow the instructions
in 9.1.3.
a
WARNING! Whenever a new support is
inserted make sure it is correctly fastened to
its connections.
9.5 Special maintenance
Special maintenance operations are not foreseen by
the user but must be performed exclusively by the
technical assistance or by an authorised and qualified
service personnel that must refers to the Service
Manual.
How to carry out special maintenance operations and
the frequency of maintenance are described in the
Service Manual.
Contact the manufacturer service for special
maintenance.
a
WARNING! Special maintenance is carried
out by the technician under guarantee only if
the utilizer has correctly and regularly carried
out all ordinary maintenance operations and
if the uilizer has filled out and kept up-to-
date the Maintenance Logbook.
9.5.1 Cleaning the water inlet filters
Proceed as follows to clean the water inlet filters.
1) Look at the back of the machine at the bottom
(Fig. 16).
2) Unscrew the cap.
3) Remove the filter.
4) Clean the filter.
5) At the end of the cleaning operations, refit the
filters in succession.
Fig. 16