Rhima DVS, Руководство оператора

Страница: 27 / 44

Operative Instructions
27
a
WARNING! Hold the door firmly once
unlocked with the key, as there is a risk of it
falling to the ground.
3) Press the black button on the back of the display
board
4) Close the door with the key
5) Insert technician password "****": press button
1-Urinals program (1 Fig. 10) four times.
Fig. 14
The buttons and their operation are shown below,
contextualised according the menu in which you are
located:
- Use buttons 3 and 4 (Fig. 10) to navigate back and
forth the menu.
- Press button 1 (Fig. 10) to access the entry of the
menu selected.
- Within the parameter, use buttons 3 and 4 (Fig. 10)
to change the value of the red parameter and press
button 1 to confirm.
- Press buttons 1 and 2 (Fig. 10) to go back and forth to
the other blue parameters.
- Press Reset to return to the previous menu.
8.1.5 Date and time setup
Enter the menu with the technician password,
following the steps described in the paragraph "user
settings menu".
Select SET CLOCK menu and change date and time.
Fig. 15
Date and time are changed on the display and on the
printer.
8.1.6 Language setup
To change the display language, enter the menu with
the technician password, following the steps described
in the paragraph "user settings menu".
Select VARIOUS PARAMETERS menu and scroll until the
"Language" setting. Select the desired language from
those available.
8.1.7 Procedure for password change
(Authorised Technicians Only)
To generate a new technician password enter the menu
with technician level, following the steps described in
the paragraph "user settings menu".
Select SET PASSWORD menu and change technician
password by pressing buttons 3 and 4 for choose
numbers and button 1 to confirm.
See Annexes 10.3 and 10.4.
8.1.8 Settings
See Annexes 10.1 and 10.2.
8.2 Alarms
See Annex 10.5.
8.3 Warnings
See Annex 10.6 .
9 Maintenance
9.1 General information
Maintenance is a set of periodic and predefined
operations aimed at maintaining the machine
functionality in all its aspects as a result of intrinsic
wear and use.
It should be remembered that the lower operating cost
and a long life of the machine depend on the continuous