Rhima DVS, Руководство оператора

Страница: 5 / 44

Operative Instructions
5
This model of bedpan washer can be installed
(according to the choice made during configuration):
- Stand alone
- Wall-hung
- Built-in model
- Undercounter
a
WARNING! Failure to comply with the
instructions in manual, operational
negligence, incorrect use of the bedpan
washer and execution of unauthorised
changes, both on the machine and on the
programs, are the cause of cancellation by
the manufacturer of the warranty granted.
For the installation schemes see the Technical
Specifications (see pg. 2).
Ö
IMPORTANT NOTE! The Technical
Specifications (see pg. 2) must be considered
as an integral part of this user Manual.
2.1 Field of application
This machine, intended for washing and disinfecting,
is considered a class IIa medical device (as defined by
Directive 93/42/EEC class IIa). Follow the instructions
of the instrument manufacturers (according to EN
ISO 17664), as well as the national laws and directives
for the automatic treatment of medical devices. The
personnel in charge using the machine daily must
be aware of its main features, and must also receive
adequate and continuous training.
2.1.1 Intended use
The bedpan washer is designed for the needs of
washing and disinfecting badpans, urine bottles,
commodes, urology containers, kidney-shaped basins,
drainage bottles and other clinical containers used in
hospital wards.
2.1.2 Intended users
Specialized personnel capable of working in a CSSD,
Hospital’s disinfection area and nursine homes.
2.1.3 Intended use of environment
The machine is intended to be used only for internal
uses. The machine is designed to be operational up
to a maximum altitude of 2000 metres (6562 ft), at a
temperature between 5 and 40°C (41 and 104°F) and
used in an environment with a maximum humidity of
80% for temperatures up to 31°C (88°F), decreasing
linearly to 50% at 40°C (104°F).
2.2 Label specification
Each bedpan washer is equipped with an identification
label (for the position see 8, Fig. 2). The following table
shows the symbols used on the identification label:
Symbol Description
Manufacturer of the device.
Date of manufacture of the device.
Device serial number from the
manufacturer.
Model name of the device.
Indicates the permitted temperatu-
re range (min./max.) of the water
supply (steam where present).
Flow pressure on the water inlet
(steam where present) connected
from min. to max.
The user manual includes important
safety information. Failure to comply
with these instructions can result in
injury and material damage. Please
read carefully the user manual.
For indoor use only.
Keep away from sunlight.
Keep dry.
Please read this user manual
carefully before commissioning the
device.
In affixing this CE mark, the
manufacturer declares that this
product fulfils the basic requiremen-
ts of the machinery directive.
The number below the mark identify
the notification body.
For the disposal of the machine
please refer to chapter "Equipment
Disposal".
Ö
IMPORTANT NOTE! Do not cover the labels
placed on the machine for any reason and
replace them immediately if damaged.
xxxx