Remberg ISO-plus-CAN, Руководство пользователя

Страница: 3 / 43

User manual - - 5
Introduction
Thanks for choosing is controller.
The ISO-RS4 series integrates in a single device the main elements of the control
loop: reading of temperature sensor, control output by SSR module, reading
and control of the current on the load by means of integrated current CT. Serial
communication RS485 and ModbusRTU or CANopen protocol allow the connection
to PC/HMI Panels for supervisory functions/remote control.
This device is provided with alarms functions, management of double action
installation and possibility to be used as expansion controlled by PLC.
1 Safety standards
Read carefully the safety guidelines and programming instructions contained in this
manual before using/connecting the device.
Disconnect power supply before proceeding to hardware settings or electrical
wirings.
Only qualified personnel should be allowed to use the device and/or service it and
in accordance to technical data and environmental conditions listed in this manual.
Do not dispose electric tools together with household waste material. In observance
European Directive 2002/96/EC on waste electrical and electronic equipment and
its implementation in accordance with national law, electric tools that have reached
the end of their life must be collected separately and returned to an environmental-
ly compatible recycling facility.
2 Model identification
ISO-plus-RS4
Power supply 24Vdc ±15% + 1 analogue input + 2 logic
output 24Vdc/50mA + 1 output 0/4...20mA + RS485 +C.T.
ISO-plus-CAN
Power supply 24Vdc ±15% + 1 analogue input + 2 logic
output 24Vdc/50mA + 1 output 0/4...20mA + CANopen
+C.T.
3 Technical data
3.1 Main features
Operating temperature 0-45°C, humidity 35..95uR%
Box D IN43880, 18 x 90 x 64 mm
Material
Box: PC UL94V0 self-extinguishing; front panel: PC
UL94V0 self-extinguishing
Prote ction IP20 (box and terminal blocks)
Peso Approx. 30 g