30 -
User manual
9.4 GROUP D - ALARM 1
56
AL.1
Alarm 1 (Word modbus 2056)
The alarm intervention is related to Alarm 1.
0
Disabled. (
Default
)
1
Absolute alarm (threshold) referred to process active above
2
Absolute alarm (threshold) referred to process active below
3
Band alarm
4
Upper deviation alarm
5
Lower deviation alarm
6
Absolute alarm referred to active setpoint above
7
Absolute alarm referred to active setpoint below
8
Status alarm (active in RUN / START)
9
Cold actuator auxiliary (Cold action in double loop)
10
Heater Break Alarm and Overcurrent Alarm
11
Sensor error. Active alarm in case of broken sensor.
12
Remote. Alarm enabled by word 1211
57
A.I.5.o
Alarm 1 State Output (Word modbus 2057)
Alarm 1 output contact and intervention type.
0
(N.O. Start) Normally open, active at start (
Default
)
1
(N.C. Start) Normally closed, active at start
2
(N.O. Threshold) Normally open, active on reaching alarm
1
3
(N.C. Threshold) Normally closed, active on reaching alarm
1
58
a.1.Hy.
Alarm 1 Hysteresis (Word modbus 2058)
-10000..+10000 [digit] (degrees.tenths for temperature sensors).
Default
0.5.
59
a.1.s.e.
Alarm 1 State Error (Word modbus 2059)
State of contact for alarm 1 output in case of error.
0
0 mA if alarm 1 on AO. Open contact if alarm 1 on Q1 or Q2.
Default
1
4 mA if alarm 1 on AO. Closed contact if alarm 1 on Q1 or Q2.
2
20 mA if alarm 1 on AO. Open contact if alarm 1 on Q1 or Q2
3
21.5 mA if alarm 1 on AO. Closed contact if alarm 1 on Q1 or Q2.
60
a.1.s.S.
Alarm 1 State Stop (Word modbus 2060)
Alarm 1 output contact state with controller in STOP
0
0 mA if alarm 1 on AO. Open contact if alarm 1 on Q1 or Q2.
Default
1
4 mA if alarm 1 on AO. Closed contact if alarm 1 on Q1 or Q2.
2
20 mA if alarm 1 on AO. Open contact if alarm 1 on Q1 or Q2
3
21.5 mA if alarm 1 on AO. Closed contact if alarm 1 on Q1 or Q2.
4
Active alarm in Stop
1
On activation, the output is inhibited if the controller is in alarm mode. Activates only if alarm condition
reappers, after that it was restored.
Содержание ISO-plus-CAN
Страница 1: ...ISO plus CAN ISO plus RS4 User manual...