Remberg ISO-plus-CAN, Руководство пользователя

Страница: 20 / 43

22 - User manual
Modbus
address
Descrizione
Read
Write
Reset
value
1220
Command output percentage (0-100)
Heating output percentage in double loop
R/W 0
1221 Cooling output percentage in double loop (0-100) RO 0
1222 Current CT (ampere with tenth) RO 0
1223 Current media CT (ampere with tenth) RO 0
1224 Current CT ON (ampere with tenth) RO 0
1225 Current CT OFF (ampere with tenth) RO 0
1226 Cold junction temperature (degree with tenth) RO -
1227
Output status (0=off, 1=on)
Bit 0 = OUT1
Bit 1 = OUT2
RO 0
1228
Led status (0 = OFF, 1 = ON)
Bit0 = Green led
Bit1 = Red led OUT1
Bit2 = Red led OUT2
RO 0
1229 Key status (0=rilasciato, 1=premuto) RO 0
1230 Dip 1 value RO 0
1231 Dip 2 value RO 0
1232 Process (if temperature, no tenth) RO -
1233 Command setpoint (if temperature, no tenth) R/W EEPROM
1234 Alarm 1 Setpoint (if temperature, no tenth) R/W EEPROM
1235 Alarm 2 Setpoint (if temperature, no tenth) R/W EEPROM
1300 Latch on setting R/W 0
1301 Latch on lower limit calibration R/W 0
1302 Latch on upper limit calibration R/W 0
1303 Latch on virtual zero calibration R/W 0
1500 Process (if temperature, with tenth) RO ?
1501 CT instantaneous current (ampere with tenth) RO 0
1502 Current CT ON (ampere with tenth) RO 0
1503 Current CT OFF (ampere with tenth) RO 0
1504 Key status (0=rilasciato, 1=premuto) RO 0
1505 Dip 1 value RO 0
1506 Dip 2 value RO 0
1507
Digital output status (0=off, 1=on)
Bit 0 = OUT1
Bit 1 = OUT2
R/W 0
1508 Analogue output value R/W 0
2001 Parameter 1 R/W EEPROM
2002 Parameter 2 R/W EEPROM
... Parameter ... R/W EEPROM
2143 Parameter 143 R/W EEPROM